Change Am (Mw) Band Tuning Step; Specification - Sangean DT400W Operating Instructions Manual

Change AM (MW) band tuning step

In Europe and other parts of the world, AM (MW) tuning
step are 9 kHz, in America the AM tuning step is
10 kHz.
To change the AM tuning step from 10 kHz to 9 kHz,
proceed as follows:
1. Press Tuning Down button and hold meanwhile
press the Power button and hold.
2. Until the display shows SEP 9 then shows 522.
3. The AM frequency step is 9kHz now.
To change the AM tuning step from 9 kHz to 10 kHz,
proceed as follows,
1. Press Tuning UP button then Power button and
hold meanwhile press the Power button and hold.
2. Until the display shows SEP 10 then shows 520.
3. The AM frequency step is 10kHz now.

Specification

FM: 87.5 - 108.0 MHz,step 100k
AM: 522 - 1629 kHz,step 9k
520 - 1710 kHz,step 10k
WX: USA 1-7ch with alert
14