Manual Step Tuning; Memory Tuning - Sangean DT400W Operating Instructions Manual

Manual Step Tuning

Turn radio on using the On/Off button located on the
top of the radio.
Select desired band by pressing the "Band" selector
on the front of the unit.
Press the desired tuning button (Up/Down) repeatedly
until desired frequency is found.

Memory Tuning

To tune in stations already programmed into memory.
See Setting Memory Section for instructions on how to
program stations into radio memory.
1. Turn radio on using the On/Off button located on the
top of the radio.
2. Press "My Favorites" button located on the right side
of the radio. "MY" should appear on the right hand of
the display indicating function is on.
3. Use tuning controls (Up/Down) to navigate through
memory programmed stations.
4. Press "My Favorites" button to turn off
memory tuning.
10