Pedal Replacement (Threaded) - Schwinn AC Power Service Manual

Pedal Replacement (Threaded)

22. Use a 9/16" open-ended wrench to remove the pedal. Turn
counter-clockwise to remove the user right pedal, turn
clockwise to remove the left pedal.
NOTE: The crank arm and pedal are shown detached from
the bike for clarity only, it is not necessary to remove the
crank arm.
23. Use a torque wrench coupled with a 9/16" crows foot set 90
degrees in relation to the wrench to install the new pedal
into the crank arm, torquing the pedal the value below:
35-40 ft-lb / 47-54 Nm
NOTE: The user right side pedal threads into the crank arm
clockwise. The user left side pedal threads into the crank
arm counter-clockwise.
Page 14
9/16"
90