18.
Lower the brake down and ensure that none of the brake
magnets are touching the flywheel.
19.
Once the belt has been tensioned so that the correct Hz is
measured and the flywheel has been checked for align-
ment then tighten the axle bolts that were loosened in Step
4.
NOTE: Part of the frame has been moved for clarity
20.
Lower the brake down and ensure that none of the brake
magnets are touching the flywheel.
21.
Once the chain has been tensioned and the flywheel has
been checked for alignment, re-install and tighten the axle
bolts.
Brake Magnets
Flywheel
Appx. 1.7mm
Appx. 1.7mm
Page 13