Schwinn AC Power Service Manual page 31

5. Remove the Brake Assembly from the bike:
a. Use a 3mm allen key to loosen the brake bolt lock screw
(blue).
b. Using a pair of needle nose pliers, carefully disconnect
the brake spring from the frame (green).
c. Using a 16mm open-ended wrench and a 16mm socket,
remove the brake bolt (yellow), then remove the brake
assembly.
6. Remove the lower two M5 screws and move the brake ad-
justment nut to the new brake assembly, then reinstall.
7. Once installed, lower the brake down and ensure that none
of the brake magnets are touching the flywheel.
Optional Step - Bikes with Echelon2 Console Only
8. Turn on console.
Spring
Appx. 1.7mm Appx. 1.7mm
Page 31