Stamina X 35-1102A Owner's Manual page 12

OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(47) clockwise. To
decrease the load, turn the TENSION KNOB(47) counterclockwise.
There are eight levels for the load adjustment.
NOTE: The load will increase as you pull faster.
47
PEDAL STRAP ADJUSTMENT
If you feel it is more comfortable for your workout, you can attach the PEDAL STRAP(37) to the lower
position in the PEDAL CAP(101) as shown in illustration 1 below. Run the PEDAL STRAP(37) through the
opening from the bottom of the PEDAL CAP(101). Pull the PEDAL STRAP(37) to make the Knot against the
bottom of the PEDAL CAP(101). Run the PEDAL STRAP(37) through the opening in the PEDAL CAP(101)
on the other side from the top as shown in the illustration 1, then make the end of the PEDAL STRAP(37)
go up to attach onto the upper part of the PEDAL STRAP(37) with the Hook & Loop Pad.
Attach the end of the PEDAL STRAP(37) to different position with the Hook & Loop Pad to adjust the length.
Refer to illustration 2.
1. 2.
Hook & Loop Pad
Knot
End of Pedal Strap
Hook & Loop Pad
12