Af Fine-Tune - Nikon Z 7 Reference Manual

AF Fine-Tune

Fine-tune focus for up to 30 lens types. Use only as required. We
recommend that you perform fine-tuning at a focus distance
you use frequently; if you perform focus-tuning at a short focus
distance, for example, you may find it less effective at longer
distances.
• AF fine-tune (On/Off): Choose On to turn AF tuning on, Off to turn
it off.
• Saved value: Tune AF for the current lens.
Press 1 to move focal point away from
camera or 3 to move focal point
toward camera; choose from values
between +20 and –20. The camera can
store values for up to 30 lens types.
Only one value can be stored for each
type of lens.
• Default: Choose the AF tuning value
used when no previously saved value exists for the current
lens.
• List saved values: List previously saved AF
tuning values. To delete a lens from the
list, highlight the desired lens and press
O. To change a lens identifier (for
example, to choose an identifier that is
the same as the last two digits of the
lens serial number to distinguish it from other lenses of the
same type in light of the fact that Saved value can be used
with only one lens of each type), highlight the desired lens and
press 2. A menu will be displayed; press 1 or 3 to choose an
identifier and press J to save changes and exit.
G button ➜ B (setup menu)
Menu Guide > B The Setup Menu
Current value
Saved value
297