Nikon Z 7 Reference Manual page 388

5
f: Establish a wireless connection.
Set the remote flash units to radio AWL remote mode and set
the devices to the channel you selected in Step 3, then pair
each of the remote units with the WR-R10 according to the
option selected in Step 4:
• Pairing: Initiate pairing on the remote unit and press the
WR-R10 pairing button. Pairing is complete when the LINK
lamps on the WR-R10 and flash unit flash orange and green;
once a connection is established, the LINK lamp on the
remote flash unit will light green.
• PIN: Use the controls on the remote flash unit to enter the
PIN you selected in Step 4. The LINK lamp on the remote unit
will light green once a connection is established.
6
f: Confirm that the flash-ready lights for all flash units are lit.
In radio AWL, the flash-ready indicator will light in the camera
display when all flash units are ready.
D
Listing Remote Flash Units
To view the flash units currently controlled using radio AWL, select
Flash control > Radio remote flash info in the photo shooting menu.
The identifier ("remote flash name") for each unit can be changed
using flash unit controls.
364 Remote Flash Photography
Connected flash unit
Group Flash-ready indicator