Advertisement
Advertisement
Related Manuals for Nemtek Merlin 4
Summary of Contents for Nemtek Merlin 4
- Page 1 Merlin 4 Electric Fence Energizer User Manual...
-
Page 2: Table Of Contents
Table of Contents Introduction & company profile Guarantee NEMTEK Group outlets Using your keypad What the lights indicate IEC safety information... -
Page 3: Introduction & Company Profile
Introduction & company profile INTRODUCTION Thank you for choosing our product! The NEMTEK Merlin 4 Electric Fence Energizer is designed and manufactured to provide many years of reliable use, if installed and maintained correctly. The guidelines provided in this manual will assist you with the basic operation and maintenance of your Merlin 4. -
Page 4: Guarantee
NEMTEK does not guarantee that the operation of the product will be uninterrupted and totally error free. Faulty units must be returned to one of the NEMTEK Group outlets. The buyer shall pay all shipping and other charges for the return of the product to NEMTEK or NEMTEK Security Warehouse. -
Page 5: Nemtek Group Outlets
NEMTEK Group outlets HEAD OFFICE Tel: +27 (0)11 462 8283 Northriding Commercial Park Fax: +27 (0)11 462 7132 Stand 251, Aintree Street, Northriding Randburg, South Africa EXPORTS Tel: +27 (0)11 462 8283 exports@nemtek.com Fax: +27 (0)11 462 7132 EDENVALE Tel: +27 (0)11 453 1970... -
Page 6: Using Your Keypad
Using your key pad SWITCH THE FENCE ON/OFF To switch the fence On or Off, enter your four digit PIN followed by the # key. If the red ON light is lit or flashing, the fence is energized. • Don’t pause for more than 5 seconds while entering the digits, or the control panel will reject your PIN number. - Page 7 Using your key pad BYPASS THE SIREN AND STROBE LIGHT (SILENT ALARM) Enter your PIN and press the * key, enter the digit 4, then press the # key. The beeper in the control panel and energizer will still be active. UN-BYPASS THE SIREN AND STROBE LIGHT Enter your PIN and press the * key, enter the digit 7, then press the # key.
- Page 8 Using your key pad BYPASS THE SERVICE ALARM Enter your PIN and press the * key, enter the digit 9, then press the # key. The SERVICE ALARM light will start flashing slowly to confirm that the service alarm is bypassed.
-
Page 9: What The Lights Indicate
What the lights indicate Power Good Fence Gate Service Condition: Remarks Light Light Light Light Light Light SLOW Fence on, FENCE GOOD FLASH working properly Fence off, FENCE OFF working properly MAINS System on FAILURE battery power BATTERY PULSE Check mains, (5 SEC) call for service BATTERY... -
Page 10: Iec Safety Information
IEC Safety Information • There are no user serviceable parts inside the energizer. • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similar qualified persons in order to avoid a hazard. •...