Hw-Module Profile Stats Qos-Enhanced - Cisco NCS 540 Series Routers Command Reference Manual

hw-module profile stats qos-enhanced

hw-module profile stats qos-enhanced

To enable the four counter mode in the system, use the hw-module profile stats qos-enhancedcommand in
XR Config mode. To disable this mode, use the no form of the command. In the four counter mode, statistics
for conform, violate, and exceed packets are collected in the hardware and displayed using the show policy-map
command.
hw-module profile stats qos-enhanced
This command has no keywords or arguments.
Syntax Description
The qos-enhanced mode is disabled by default, and therefore only the conform and violate statistics are
Command Default
available in the two counter mode.
XR Config mode
Command Modes
Command History
Release
Release
6.2.1
The router must be reloaded for the hw-module command to be functional.
Usage Guidelines
Task ID
Task
ID
qos
The following example shows how to enable the four counter mode on the router.
RP/0/RP0/CPU0:router#config
RP/0/RP0/CPU0:router(config)#hw-module profile stats qos-enhanced
RP/0/RP0/CPU0:router(config)#commit
RP/0/RP0/CPU0:router# reload
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
10
Modification
This command was introduced.
Operation
read,
write
QoS Classification Commands