Siemens SIMOTICS S-1FK7 G2 Service Instructions Manual page 27

5. Click on the "Spare packages" tab.
1
The Article number, brief description and the photograph of the encoder for your motor are
displayed.
❒
Based on the displayed encoder Article number, you can directly order an encoder that has
been loaded with the appropriate data for your motor.
Order the encoder as described in Chapter "How do you order a replacement encoder?
(Page 29) ".
This is how you determine the order number based on the subsequent tables
The encoder Article number is the order number for the encoder.
The type of encoder used is displayed in the motor Article number:
● For 1FK7 G2 and FT7 at the 14th position, e.g. 1FT7□□□-□□□□□-□C□□
● For 1FG1 at the 9th position, e.g. 1FG1□□□-□R□□□-□□□□
Note
Note regarding compatibility
Defective encoders with an "A" at the 15th position of the Article number (6FX2001-5J□□□-
□□A□) are replaced by an encoder with a "C" at the 15th position of the Article number
(6FX2001-5J□□□-□□C□).
Example for a replacement encoder AM20DQI for 1FK7100:
The encoder with "old" Article number: 6FX2001-5JE20-2DA1 is replaced by an encoder
with the "new" Article number: 6FX2001-5JE20-2DC1.
You can also use the replacement encoder with a "C" at the 15th position of the Article
number for motors with KTY84-130 temperature sensor as well as motors with Pt1000
temperature sensor.
You can only use the replacement encoder with DRIVE-CLiQ interface and an "A" at the
15th position of the Article number for motors with KTY84-130 temperature sensor. These
encoders can no longer be ordered.
Replacing an encoder for SIMOTICS S-1FK7 G2, S-1FG1 and S-1FT7
Service Manual, 01/2018, A5E34676237B AC
Encoder Article number = Order No
2.4 How do you determine the replacement encoder?
Description
25