Speaker Installation - Samsung HT-THQ22 Instruction Manual

Speaker Installation

How to install the speaker and the stand (Tallboy type)
1 2
Turn the STAND (B) upside-down Turning the screw (D) clockwise,
and connect it to the STAND connect it to two holes marked
BASE (C). with the arrow using a screwdriver
as shown in the ullustration.
4 5
Connect the assembled stand to Turning the screw (E) clockwise,
the SPEAKER (A). connect to a hole on the rear of
the speaker using a screwdriver as
shown in the illustration.
13
Component
A: SPEAKER
B: STAND
C: STAND BASE
D: Screw
E: Screw
3
Turning the supplied screw (E)
clockwise, connect it to a hole on
the rear of the Speaker.
6
This is the successfully assembled
speaker.
* Make sure that the TALLBOY type
speaker should be installed on the flat
and stable area. Otherwise it may fall
down due to external shock.
How to install the speaker and the stand (Half tallboy type)
1 2
Connect the SPEAKER (A) with Turning the screw (D) clockwise,
the STAND BASE (C). connect it to two holes marked
with the arrow using a screwdriver
as shown in the illustration.
4
This is the successfully assembled
SPEAKER (A).
Component
A: SPEAKER
B: STAND
C: STAND BASE
D: Screw
E: Screw
3
Turning the screw (E) clockwise,
connect to a hole on the rear of
the speaker using a screwdriver as
shown in the illustration.
14
GB