Speaker Installation; Connecting The Optional Wireless Receiving Amplifier - Samsung HT-THX22 Instruction Manual

Speaker Installation

With the HT-THX22front speakers and HT-THX25 front/rear speakers, you have the option of installing the speakers on
Stands, or directly to the Stand Base.
Speaker Components
SPEAKER STAND
How to Install the Speaker on the Stand
1 2
3 4
5 6
How to Install the Speaker on the Stand Base
1 2
3
14
STAND BASE Screw (A) Screw (B)
1
Turn the STAND upside-down and connect it to
the STAND BASE.
2
Insert two screws (A) into the two holes marked with arrows
using a screwdriver as shown in the illustration.
3
Insert a screw (B), into the hole on the rear of the Speaker
STAND.
4
Connect the assembled stand to the SPEAKER.
5
Insert another screw (B) into the hole on the rear of the
speaker using a screwdriver as shown in the illustration.
6
This is the SPEAKER successfully assembled with
the Stand.
• Make sure that the speaker is installed on a flat and stable area.
Otherwise it may be easily knocked over.
1
Connect the SPEAKER with the STAND BASE.
2
Insert the screw (B) into the hole on the rear of the speaker
using a screwdriver as shown in the illustration.
3
This is the SPEAKER successfully assembled with
the Stand Base.

Connecting the Optional Wireless Receiving Amplifier

To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)
HT-THX22
Rear Speaker (L)
WIRELESS RECEIVER MODULE
HT-THX25
Rear Speaker (L)
WIRELESS RECEIVER MODULE
Front Speaker (R) Front Speaker (L)
Center Speaker
Subwoofer
Rear Speaker (R)
Front Speaker (R) Front Speaker (L)
Center Speaker
Subwoofer
Rear Speaker (R)
GB
15