Test Tone - Samsung 2.0060510083255e16 Instruction Manual

Test Tone

Use test tone to check the speaker connection status or level.
26
To Automatically Output Test Tone
REMOTE CONTROL
Press TEST TONE button.
Test signal will be automatically output as follows; F.L
•
S.L S.W.
During test tone output, press ...† button to adjust the speaker output level
•
from -10 to +10 dB by 1 step.
To Stop Test Tone
Press TEST TONE button again.
•
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press FUNCTION button 5 times.
"TEST-T AUTO" appears in the display.
•
3
Press SURROUND button.
Test signal will be automatically output as follows; F.L
•
S.R S.L S.W .
During test signal output, press SELECT (
•
output level from -10 to +10 dB by 1 step.
To Stop Test Tone
Press SETUP button 1 time.
"SETUP MODE OFF" appears on the display and test tone stops.
•
√
CEN
√
CEN
) button to adjust the speaker
,
F.R S.R
F.R