Test Tone - Samsung HT-AS610 Instruction Manual

Test Tone

Use test tone to check the speaker connection status or level.
To Automatically Output Test Tone
REMOTE CONTROL
Press TEST TONE button.
Test signal will be automatically output as follows; F.L
•
During test tone output, press ...† button to adjust the speaker output level
•
from -10 to +10 dB by 1 step.
To Stop Test Tone
Press TEST TONE button again.
•
MAIN UNIT
1
Press SETUP button.
•
2
Press FUNCTION button 5 times.
•
3
Press SURROUND button.
•
•
To Stop Test Tone
Press SETUP button 1 time.
"SETUP MODE OFF" appears on the display and test tone stops.
•
26
√
CEN
S.L S.W.
√
"SETUP MODE" appears on the display and enters into Setup Mode.
"TEST-T AUTO" appears in the display.
Test signal will be automatically output as follows; F.L CEN
S.R S.L S.W .
During test signal output, press SELECT ( ) button to adjust the speaker
,
output level from -10 to +10 dB by 1 step.
F.R S.R
F.R
Test Tone Output
F.L (Front-Left) : -10 ~ +10dB
•
CEN (Center) : -10 ~ +10dB
•
F.R (Front-Right) : -10 ~ +10dB
•
S.R (Surround-Right) : -10 ~ +10dB
•
S.L (Surround-Left): -10 ~ +10dB
•
S.W (Subwoofer): -10 ~ +10dB
•
To Manually Output Test Tone
√
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and the unit enters into Setup Mode.
•
2
Press FUNCTION button 6 times.
"TEST-T MANU" appears in the display.
•
3
Press SURROUND button.
Each time you press this button, F.L CEN F.R
•
be selected in turn.
4
Press SELECT( , ) button to set the test tone as you
want.
You can adjust the speaker output level from -10 to +10dB by 1 step.
•
The sound gets quieter at -10dB and louder at +10dB.
•
To Stop Test Tone
Press SETUP button 1 time.
"SETUP MODE OFF" appears on the display and test signal stops.
•
GB
S.R S.L S.W will
27