Automatic Suction Power Control - Miele S 8310 Descriptive Technical Documentation

DTD no. 41-8000
2.2

Automatic Suction Power Control

Fig. 5: Suction Power Control Components
Fig. 6: Low-Pressure Channel Connection (1) in Casing Top
The built-in suction power control consists of a pressure sensor on the electronic
(040 Fig. 5, Pos. 2) that detects low pressure in the bag compartment via a hose
(040 Fig. 5, Pos. 1). The low pressure is measured and compared to a fixed value
programmed into the electronic. If these values do not match, the motor speed
will be automatically corrected.
When the vacuum cleaner is switched on for the first time, it will switch on at
the "Auto" power setting.
With subsequent uses, the vacuum cleaner will switch on at the last-used
power setting.
07.06.2013, US_am
Descriptive Technical Documentation
This information should not be duplicated or passed on without Miele approval. All rights reserved.
040-5