Led Handle Battery Replacement (Model-Dependent) - Miele S 8310 Descriptive Technical Documentation

060-4
A Push the housing (060 Fig. 2, Pos. 3) into position.
A Check for correct function.
4.3

LED Handle Battery Replacement (Model-Dependent)

Fig. 3: Battery in LED Handle
Note
Three 1.5V AAA batteries required.
A Remove the retaining screw (060 Fig. 3, Pos. 1) from the handle (060 Fig. 3,
Pos. 3).
A Press the two locking tabs on the sides of the battery cover and remove the
cover (060 Fig. 3, Pos. 1).
A Remove the battery holder (060 Fig. 3, Pos. 2).
A Take the 3 old batteries out of the battery holder and insert the 3 new
batteries. Observe polarity.
A Re-install the battery holder. There is an arrow imprinted in the battery
compartment and on the battery holder that indicates which direction the
batteries must be facing.
A Screw the cover back in place.
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Descriptive Technical Documentation
DTD no. 41-8000
07.06.2013, US_am