Use; Switching On And Off; Regulating The Suction Power - Miele SMUL0 Operating Instructions Manual

 After the battery has been fully
charged once in the PowerUnit, the
charger cradle can be used to charge
it. Push the battery into the charger
cradle until it audibly clicks into place.
 Insert the plug into a power socket.
The charging process will start. The
battery charging state indicator flashes
on the left.
You can find out more about the battery
charging state indicator in "Installation
and connection – Battery charging state
indicator".
If you place the run-down battery in
the charger cradle straight after use, it
will only start charging once the bat-
tery has cooled down.
The cooling process can take up to
60 minutes. The battery charging state
indicator on the charger cradle will not
respond during this time.

Use

Switching on and off

 Pull the plug out of the charging
socket on the battery.
 If you have put the vacuum cleaner
away in the the wall bracket for stor-
age, take it out.
 Press the On/Off switch on the Com-
fort handle .

Regulating the suction power

The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to man-
oeuvre the Electrobrush.
There are 3 power levels to choose from
on the Comfort handle:
1 Lowest power level
for light soiling
2 Medium power level
for normal soiling
Max. Highest power level
for heavy soiling
25