Table of Contents
Advertisement
(12)Scaling enable/disable setting (address: 010E
The scaling enable/disable status is set for each channel.
For details on the scaling function, refer to the following.
Scaling Function (
b15 b14 b13 b12 b11 b10 b9 b8
0
0
(a) Enabling the setting
Turn on and off Initial data setting request flag (RY9).
(b) Default value
The default value is set to Disable (1) for all channels.
(13)CH
Scaling lower limit value (address: 010F
CH
Scaling upper limit value (address: 0110
The scale conversion range is set for each channel.
For details on the scaling function, refer to the following.
• Scaling Function (
(a) Setting range
• Setting range: -32000 to 32000
• An error occurs in a channel for which a value out of the setting range above is set. The error code
(090
) is stored in Latest error code (RWr0), Error flag (RXA) turns on, and the ERR. LED turns on.
H
• The value to be set must satisfy the condition of Scaling upper limit value > Scaling lower limit value. An
error occurs in a channel for which the setting not satisfying the condition is set. The error code (091
stored in Latest error code (RWr0), Error flag (RXA) turns on, and the ERR. LED turns on.
• If Scaling enable/disable setting (address: 010E
limit value (address: 010F
0112
, 0114
, 0116
H
H
(b) Enabling the setting
Turn on and off Initial data setting request flag (RY9).
(c) Default value
The default value is set to 0 for all channels.
Because the default value is set to 0, change the setting value when using the scaling function.
Page 79, Section 8.6)
b7 b6 b5 b4 b3
0
0
0
0
0
0
0
Data for b4 to b15 are fixed to "0".
Page 79, Section 8.6)
, 0111
, 0113
, 0115
H
H
H
) are ignored.
H
)
H
b2 b1
b0
0
0
0
CH4
CH3
CH2 CH1
0: Enable
1: Disable
, 0111
, 0113
H
H
, 0112
, 0114
H
H
) is set to Disable (1), the settings of CH
H
) and CH
Scaling upper limit value (address: 0110
H
APPENDICES
, 0115
),
H
H
, 0116
)
H
H
) is
H
Scaling lower
,
H
147
A
Advertisement
Table of Contents
Troubleshooting
