Appendices; Appendix 1 Details Of Remote I/O Signals; Appendix 1.1 Remote Input Signals - Mitsubishi NZ2GF2B-60DA4 User Manual

APPENDICES

Appendix 1
This section describes the details of remote I/O signals assigned to the master/local module.
The assignment of each device number is for the case when the remote I/O signals of the main module are assigned
as follows.
• Remote input signal: RX0 to RX1F
• Remote output signal: RY0 to RY1F
Appendix 1.1
(1) Warning flag (RX7)
This signal turns on when a minor error occurs.
Five seconds after the cause of the minor error is eliminated, the value in Latest warning code (RWr1) is cleared
automatically (0000
Latest warning code (RWr1)
Warning flag (RX7)
Remote READY (RXB)
Details of Remote I/O Signals
Remote input signals
is stored) and Warning flag (RX7) turns off.
H
Controlled by the D/A converter module
The minor error is
A minor error
removed.
occurred.
0000 Error code or alarm code
H
ON
OFF
ON
5 seconds
have passed.
5 seconds
OFF
APPENDICES
0000
H
131
A