Bay Networks BayStack 303 User Manual page 79

3.
Figure 3-7.
4.
5.
6.
893-01010-A
Type 1 to select Upgrade Switch Software.
The Switch Software Upgrade Menu is displayed (see
***************************************************************************
IP Address: 000.000.000.000
MAC Address: 00.00.00.00.00.00
***************************************************************************
1 - Set Switch IP Address: [000.000.000.000]
2 - Set IP Netmask: [255.255.255.0]
3 - Set TFTP Server IP Address: [000.000.000.000]
4 - Set Default Gateway IP Address: [000.000.000.000]
5 - Set Software Image FIle Name: [ ]
6 - Download Image
7 - Reset Switch
Enter Command:
Switch Software Upgrade Menu
Enter all the necessary information (options 1 through 5) by typing the
command number and entering the information at the command line.
Type 6 to download the software to the flash memory of the switch.
The software is downloaded from the TFTP server to the flash memory of the
BayStack switch.
Type 7 to reset switch.
Command 7 performs a software reset of the switch. Upon successful
completion of the power-up self-tests, the Main Menu is displayed.
Customizing and Managing the BayStack Switches
Bay Networks BayStack 30X Ethernet Switch
Switch Software Upgrade Menu
Figure 3-7).
3-25