Bay Networks BayStack 303 User Manual page 53

2.
*****************************************************************************
IP Address:
Mac Address:
Software Version:
System Up Time:
Switch Status:
*****************************************************************************
1 -- IP Address
2 -- IP Subnet Mask Address
3 -- Default Gateway Address
4 -- Spanning Tree Protocol
5 -- Telnet Access
6 -- Telnet password
Enter Command ([ESC]---Previous Screen [Space]---Refresh Screen)
Figure 2-11.
3.
4.
893-01010-A
Type 1 to select 1---Switch Network Configuration from the System
Configuration menu.
This selection displays the Switch Network Configuration menu (see
Figure 2-11).
Bay Networks BayStack 303 Ethernet Switch
[0.0.0.0]
[00:00:81:12:12:12]
[1.0]
[0d:00h:00m:00s]
[Switching]
Switch Network Configuration menu
Type 1 in the command line.
This action refreshes the screen and displays the current IP address value.
Enter the IP address of the switch in the command line.
This action refreshes the screen and displays the new IP address value in the
field on the menu.
Note: IP addresses are written as four decimal numbers (for example,
123.123.123.123). Each decimal number represents an 8-bit octet. When
strung together, the four octets form the 32-bit Internet address. This
notation is called dotted-decimal notation. The largest possible value of a
field in a dotted-decimal number is 255, which represents an octet of all
ones.
Switch Network Configuration
Installing the BayStack Switches
2-19