Automatic Privacy - AT&T PARTNER Plus Installation And Programming Manual

Automatic Privacy

This feature is typically used for
extensions connected to fax
machines and modems, which
make and receive data calls that
should not be interrupted.
Code: #304
Description: Automatically prevents users with the same lines from joining
telephone conversations on a specific extension.
Valid Entries: 1 = Assigned to extension
2 = Not assigned
Considerations: A user can override Automatic Privacy with the Privacy feature
(p. 4-l0).
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 0 ] [ 4 ]. The
display reads:
Auto Privacy
Extension:
2. Enter the extension to be programmed. For example, to program exten-
sion 16, press [ 1 ] [ 6 ] . The display reads:
Auto Privacy 16
2 Not Assigned
3. To assign Automatic Privacy to the extension, press [ Next Data ] until the
display reads:
Auto Privacy 16
1 Assigned
To program another extension, press [ Next Item ] or [ Prev Item ] until the extension number
shows on the display. Repeat step 3.
= Factory Setting
To go to the next procedure: [ Next Proc ]
To go to the previous procedure: [ Prev Preoc ]
To return data to the factory setting: [ Remove ]
To go to a specific procedure: [ # ] [ x ] [ x ] [ x ]
(where XXX is the procedure number)
To exit system programming: [ Feature ] [ 0 ] [ 0 ]
System Programming 3-15