Calculation Data And Measurements - Siemens Acuson S1000 Instructions For Use Manual

Selection
Up or down arrow key
ZOOM
Show Trace or F9
function key
Auto/Manual
Guided/Manual
Apply
SET ED
SET ES
Backup
Mark
Draw
End Trace
Change Units
Close
Save&Close
Save
Exit

Calculation Data and Measurements

Measurement
EF
HR
EDV
ESV
I n s t r u c t i o n s f o r U s e
Description
Changes the gamma curve (brightness) of the active image.
Toggles between zoom factors for the 2D images.
(Available only for systems without a touch screen)
Hides or displays the outlines and their long axes, including any markers on the images.
Calculation data and measurement values continue to display at the bottom of the screen.
Alternates the automatic trace method and the manual trace method for generating an
outline.
Note: If you create a trace and toggle between Auto and Manual before saving the trace,
the program deletes the trace so you can start over.
(Available for contrast studies only)
Alternates the guided trace method and the manual trace method for generating an
outline.
Note: If you create a trace and toggle between Guided and Manual before saving the
trace, the program deletes the trace so you can start over.
(Available for non-contrast studies only)
When a trace is displayed on both the ED and ES frames and after changes to the border
are made, applies the syngo Auto Left Heart algorithm to all frames in the clip.
Selects the currently displayed frame as the representative frame for the End Diastole
image.
Selects the currently displayed frame as the representative frame for the End Systole
image.
Erases the most recent segment or marker of a user-created outline. Available during
tracing of a new outline and before the outline is complete.
Activates the mark function for creating an outline from positioned points along the
border.
Activates the trace drawing function for creating an outline.
Completes the manual marking of LV or LA border points and calculates the results.
Changes the units displayed in calculations and the volume graph. Units available are ml
2
and ml/m .
Exits the Volume Range Selector or BSA Calculator dialog box without saving
changes.
Exits the Volume Range Selector or BSA Calculator dialog box and saves changes.
Saves the calculation data and measurements to a findings record.
Exits syngo Auto Left Heart.
Unit Description
% Ejection Fraction calculated for the selected view.
bpm Heart rate detected by the program for the selected view.
2
ml or ml/m End-diastolic volume calculated for the selected view.
2
ml or ml/m End-systolic volume calculated for the selected view.
A p p e n d i x E A d v a n c e d F e a t u r e C o n t r o l s
E - 3 7