Basic Measurement Tools; 2D Measurement Tools - Siemens Acuson S1000 Instructions For Use Manual

A p p e n d i x D O n - s c r e e n C o n t r o l s

Basic Measurement Tools

Selection Description
Delete
Removes the measurement from the image and measured results.
Note: For systems without a touch screen, the selection is assigned to a soft key.
Undo Edits a trace measurement.
Note: For systems without a touch screen, the selection is assigned to a soft key.
APAD/TAD
(Available only for measurements derived from an abdominal circumference)
Switches the measured results for the anterior-posterior abdominal diameter with the
measured results for the transabdominal diameter.
Note: For systems without a touch screen, the selection is assigned to a soft key.

2D Measurement Tools

Selection Description
Distance Depth/Distance
Calculates the length of a straight line.
Ellipse Ellipse
Determines area, diameter, and circumference.
2D Trace Trace
Calculates the circumference of an irregular shape inside a manual trace.
Open Trace Open Trace
Calculates the diameter of an irregular shape inside open manual trace.
eSieCalcs eSieCalcs
Calculates the circumference of an automatically traced irregular shape inside a rectangle.
Angle Angle
Determines the degree of the acute angle.
Auto Volume Auto Volume
Calculates the volume and maximum distance of an automatically traced irregular shape.
Shear Velocity/ Shear Velocity/Elasticity
Elasticity
(Available only when Virtual Touch IQ is activated)
Measures the shear wave velocity and elasticity.
D - 2 6 I n s t r u c t i o n s f o r U s e