Esiescan Workflow Protocol Controls - Siemens Acuson S1000 Instructions For Use Manual

A p p e n d i x D O n - s c r e e n C o n t r o l s

eSieScan Workflow Protocol Controls

Use the system configuration menu to customize protocols.
System Config > Basic System 2 > Default Protocol Settings
System Config > eSieScan™ Protocols
Selection
(current selection)
(current selection)
Show All Views
Pause Protocol
Resume
End Protocol
Add View
Rename View
Delete
Append Paused Images
D - 1 0
Description
Next/Previous
Selects the next or previous view within a protocol.
Note: For systems without a touch screen, the selections are assigned to buttons:
Protocol
Selects a protocol.
View Name
Selects a view.
Show All Views
Displays up to 30 views for the active protocol.
Pause Protocol/Resume
Temporarily pauses or resumes the protocol.
End Protocol
Saves all data, ends the active protocol, and displays a message if any protocol views
are not complete.
Add View
Inserts a new view immediately before the active view.
Rename View
Displays a dialog box to enter a new name for the view.
Delete Image
Marks the selected view for deletion and removes the image and any measurements
from the view.
Note: The view marked for deletion is still available in the patient report and in review.
When a protocol is paused, inserts a newly saved image at the current location or at the
end of the protocol list.
I n s t r u c t i o n s f o r U s e