Installing The Water Dispenser Line; Install The Water Filter - Samsung HomePAD HP2777AT Owner's Manual And Installation

DA68-01174A 12/13/02 12:57 PM
INSTALLATION OF THE WATER DISPENSER LINE
Connect the water tube to the refrigerator.
1) Slip the compression nut and plastic ferrule
through the plastic tube.
2) After inserting the sleeve, tighten the compres-
sion nut onto 1/4" compression fitting(union).
Do not overtighten the compression
NOTE nut.
3) Slip the compression ferrule and nut on cop-
per (or plastic) tubing as shown.
Tighten the compression nut onto the com-
pression fitting(union).
4) Turn water on and check for any leakege.
Water line must be connected to
drinkable water only.
NOTE

Install the water filter.

1) As shown, the fixed cap separates from the refrigerator by rotat-
ing it counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown.
Keep the cap(A) in a safe place for recapping,
NOTE when you will not use the filter.
2) If the water filter was installed in March, put on the "SEP" sticker.
3) Remove the protective cap then position and insert the
filter as shown.
4) Slowly turn the water filter clockwise 90º to align
the indication mark on the cover, locking the filter in posi-
tion. Do not overtighten.
STICKER
(MONTH INDICATION)
Please check that the indication line aligns with the lock position.
NOTE
Page 28
SEPARATION
OF RED CAP
28
Compression Nut
Ferrule
Sleeve
Compression fitting
Ferrule
Compression Nut
(A)
COVER FILTER
ALIGN THE INDICATION MARK
WITH LOCK POSITION.