DA68-01174A
12/13/02 12:58 PM
REMOTE OPERATION
Page 51
Modify Remote control Setup
1. Once you register remote control setup, you can modify
your password in Refrigerator Manager>Access control.
2. After modifying, press "OK" button to save input data.
3. You will see following message and modification has been
completed.
You can not modify serial NO. and User ID
NOTE
Clear Remote control Setup and re-registration
1. Choose "Clear Profile" button in HomePAD
customer profile. This procedure will delete Serial NO. and ID
while other customer information.
2. HomePAD
and modification has been completed.
3. You can re-register your information anytime you want to in
HomePAD
(refer to re-registration procedure)
51
will reboot. The following message appears
TM
TM
properties>Edit customer profile.
TM
properties>Edit