Table of Contents
Advertisement
DA68-01174A
12/13/02 12:58 PM
USER INTERFACE
REMOTE OPERATION
Page 49
Network Setup - Internet Setup
-.You can set up internet here, if you did not set up Internet in
LOGGING IN process.
-.You can refer to "LOGGING IN - Internet Setup" for inputting or
modifying data.
Please confirm whether ESSID is set up correctly. If
this page is not displayed, ESSID was not set up
cor-rectly.
WARNING
1.You must set up HomePAD
2.If you set up HomePAD
WARNING
WEP (Wired Equivalent Privacy): This encrips data to ensure
Wireless LAN security.
Use WEP: You can select whether it is to use a WEP feature
and to use an encoding way of several bit(64bit,128bit)
Key1~4: You must set up four items for encoding all
Key Selection: Select key to actually use for encod
ing of WEP among four items.
Registration of Remote Control Setup
After registering refrigerator serial NO., user ID and Password,
you can control your refrigerator from a remote PC.
1. During initial start, you can register serial NO, your ID and
Password when Logging-in
2. If you miss this procedure, you can also register in
HomePAD™ properties>Edit customer profile>register profile.
3. Click "Main" button to reboot or "Next" button system to con-
tinue customer registration process. HomePAD™may reboot
to save data. after reboot, you can see following message
and registration is done.
4. If the following error appears "sending information to server
has failed", check your internet status or turn the HomePAD
off and on .
49
TM
ting Home Station Encryption.
TM
and Home Station
Encryption must match for proper communication.
Encryption after set
TM
Advertisement
Table of Contents
