Installing The Water Dispenser Line - Samsung RS267TD series User Manual

setting up your side-by-side refrigerator

INSTALLING THE WATER DISPENSER LINE

Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection.
Y
• 1/4" compression nut • plastic tubing
• copper tubing
1. Tighten the compression nut
- If you are using copper tubing, slip the compression nut
on copper tubing (not included) as shown.
- If you are using plastic tubing
compr
Do not use without the molded end(Bulb) of the plastic tubing
CAUTION
2. Tighten the compression nut
3. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut o 1/4" of the plastic tubing to make sure
you get a snug, leak-free connection.
When using power cord
To prevent power cord damage, after product installation, arrange
the remaining power cor
20_ setting up
• ferrule • ferrule
i
into the 1/4" compr
, insert the molded end(Bulb) of the plastic tubing
into the compr
dware store.
(not included) and ferrule (not included)
.
-tighten the compression nut
Assembled)
Assembled)
into the
.