X12Te-Grid Using X12Pu-Bgk To Pull-Up To Grid - Electro-Voice X1-212/90 Installation Manual

6.6.3

X12TE-GRID using X12PU-BGK to pull-up to grid

Using a X12TE-GRID combined with the X12PU-BGK can be pulled up to the grid.
To pull-up to the X12TE-GRID, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
Electro-Voice
Attach the two (2) pull-up link bars to the sidearms.
Insert the attached quick-release pins.
Verify all quick-release pins are inserted completely through the sidearm and securely locked
in position.
Attach the X12PU-BGK bottom section to the bottom element.
Attach a 5/8-inch shackle (A) to the pick point on the spreader bar.
Ensure the shackle is rated for overhead lifting.
Attach one (1) end (B) of the 3-foot wire rope sling to the shackle.
Attach the opposite end (C) of the 3-foot wire rope to the pull-up hoist.
Attach a chain bag to the pull-up hoist and insert the unextended chain into the chain
bag.
Verify all hooks, pins, shackles, and other associated rigging components are properly
positioned and secure before lifting the array.
Installation Manual
en 43
2015.04 | 02 | F.01U.310.953