ABB AC31 Assembly And Operation Manual page 134

AC31 Adapters
Replacement devices: I/O modules > Replacement device 07AC91-AD2
1.5.5.2.8 Technical data
This section provides additional information on section
bus system data" on page 4. In case of doubt, the following information applies.
For the device 07AC91-AD2, only the operating mode 12 bit is relevant.
Technical Data of the complete device
Data
Process voltage:
-> Connections
-> Fuse for L+
- Electrical isolation
Current consumption:
-> via L+
- Inrush current via L+ (when voltage is
switched on)
Power consumption
Technical Data of the binary input
Data
Input current at input voltage +24 V
Protection against reversed voltage
Overvoltage protection
The enabling input is a proprietary input.
134
For further information, please refer to the existing documentation
System description Advant Controller 31.
CAUTION!
System damage caused by voltage!
Exceeding the maximum supply or process voltage (>30 V DC) results in per-
manent system damage (destruction).
For further information, please refer to the existing documentation
System description Advant Controller 31.
3ADR010122, 8, en_US
Ä Chapter 1.3 "System data and CS31
Value
X4/L+ (pin 20), X4/L+ (pin 21), X4/M (pin 22),
X4/M (pin 23)
10 A, fast acting
No
0.19 A + output load
0.16 A²s
Replacement device: 6 W
Existing device: 5 W
Value
Typ. 6 mA
Yes
No
2018/09/24