ABB AC31 Assembly And Operation Manual page 106

AC31 Adapters
Replacement devices: I/O modules > Replacement device 07AI91-AD
Connection to the CS31 bus
Data
Connections
CS31 bus type
Termination resistor
Mechanical data
Data
Width x height x depth
Weight
Dimensions for mounting
Mounting information
To assemble or disassemble the replacement device, grab the device at the housing and not
directly at the S500 module.
Ordering data
Order No.
1SAP 800 200 R0010
106
The dimensions for the assembly holes are the same for the replacement
device and the existing device.
3ADR010122, 8, en_US
Value
X1 / B2, X1 / B1
01 (analog input)
Not available (must be provided externally if
needed)
Value
Replacement device: 120 x 140 x approx. 80
mm
Existing device: 120 x 140 x 85 mm
Replacement device: 384 g
Existing device: 450 g
See operating and assembly instructions of
the replacement device (3ADR020086M0401)
Scope of delivery
Analog input module 07AI91-AD
1x 3-pole terminal block
3x 5-pole terminal blocks
2x 9-pole terminal blocks
2018/09/24