Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the
TV source (air or cable).
Input
Return
Source List
TV
Edit Name
Input
Source List
Return
TV
----
AV1
----
AV2
----
AV3
----
S-Video1
----
S-Video2
----
S-Video3
----
Component1
----
†
Component2
Input
AV1
Setting the Signal Source
1
Press the
Press the ENTER button to select "Input".
Enter
2
Press the
√
ENTER button.
Press the
ENTER button.
•
When you connect equipment to the TV, you can choose between the
following sets of jacks: "AV1", "AV2", "S-Video1", "S-Video2", "Component1",
"Component2", "HDMI1", or "HDMI2" on the TV's rear panel, and "AV3", or
"S-Video3" on the TV's side panel.
Enter
Alternate method
Press the SOURCE button on the remote control
repeatedly to select an external signal source.
Only connected devices can be selected.
Before selecting an input source, make sure the corresponding external device is connected first.
HDMI input can be selected only when the external device is turned on and connected to the TV.
MENU button.
or
button to select "Source List", then press the
or
button to select a signal source, then press the
English-35