Memorizing Channels - Samsung HL-S5686C Owner's Instructions Manual

Memorizing Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels.
After the available channels are memorized, use the CH
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (channel manager).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected
to the TV (i.e., an air or cable system).
Channel
Return
Antenna
Air
Auto Program
Cable
Channel Manager
Fine Tune
Signal Strength
LNA On
Channel
Enter
Channel
Return
Antenna Air
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNA On
Channel
Enter
1
Press the
then press the ENTER button.
2
Press the
Press the
button.
3
Press the
button.
√
and CH buttons to scan through the channels.
MENU button. Press the
or button to select "Antenna", then press the
or button to select "Air" or "Cable", then press the ENTER
or button to select "Auto Program", then press the
English-23
or button to select "Channel",
ENTER button.
ENTER
continued...