Table of Contents
Advertisement
Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
Picture
Return
Mode
Size
16:9
Digital NR
On
DNIe
On
My Color Control
Film Mode
Off
Picture
Picture
Return
Mode
16:9
Size
4:3
Zoom1
Digital NR
On
Zoom2
DNIe
Off
Wide Fit
My Color Control
4:3
Film Mode
Off
Picture
▲
Zoom1
Move
▼
You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV Component (720p, 1080i) or HDMI (720p, 1080i) mode.
For Zoom1, Zoom2, and Wide Fit (DTV's HD signal only), you can adjust the vertical position using the
P.SIZE button on the remote control.
When watching a DTV's HD signal, you can use Wide Fit. Horizontal
zoom (Wide Fit) sets the optical picture format by expanding it both
horizontally and vertically. For example, you can reset the picture in
4:3 format to 16:9. Wide Fit does not support all external devices.
To maintain scale in the Wide Fit mode, portions of the picture on the
top and bottom will be cropped.
1
Press the
then press the ENTER button.
Press the
Enter
2
Press the
press the
Select "Return" by pressing the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
•
16:9 : Sets the picture to 16:9 wide mode.
Enter
•
Zoom1 : Magnifies the size of the picture on screen.
•
Zoom2 : Magnifies the size of the picture more than "Zoom1".
•
Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
•
4:3 : Sets the picture to 4:3 normal mode.
Alternate method
Press the P.SIZE button on the remote control
repeatedly to select one of the picture size settings.
MENU button. Press the
or
button to select "Size", then press the ENTER button.
or
buttons to select the screen format you want, then
ENTER button.
or
4 : 3
English-46
or
button to select "Picture",
button, then press the
or
button after pressing the
Wide Fit
Advertisement
Table of Contents
