Viewing An External Signal Source - Samsung SP43T8 Owner's Instructions Manual

Viewing an External Signal Source

Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box and the TV
source (broadcast or cable)
1
Press the MENU ( ) button.
Result: The options available in the Input group are
displayed.
2
Press the ENTER ( ) button.
Result: The Source List is selected.
3
Press the ENTER ( ) button again.
4
Press the or button to select signal source, then press the
ENTER ( ) button.
When you connect equipment to the TV, you can choose
between the following sets of jacks : Ext.1, Ext.2,
Ext.3 or Component on the TV's rear panel, and AV or
S-Video on the TV's side panel.
You can select these options simply by pressing the
SOURCE (
5
Press the MENU ( ) button.
Result: The options available in the Input group are
displayed again.
6
Press the or button until the Edit Name is selected.
Press the ENTER ( ) button.
7
Press the or button to select the external source to be edited.
Press the ENTER ( ) button.
Result: The device names available are listed.
VCR - DVD - Cable STB - HD STB - Sat. STB -
AV Recv. - DVD Recv. - Game - Camcorder -
DVD Combo - DHR (DVD HDD Recorder) - PC.
8
Select the required device by pressing the
Press the ENTER ( ) button to confirm.
If you change the external source while viewing, pictures
might take a short period of time to be switched.
All manuals and user guides at all-guides.com
) button.
or button.
TV Input
Source List : TV
Edit Name
Move Enter Return
TV Source List
TV
Ext.1 : - - - - - - - -
Ext.2 : - - - - - - - -
Ext.3 : - - - - - - - -
AV : - - - - - - - -
More
Move Enter Return
TV Input
Source List : TV
Edit Name
Move Enter Return
TV Edit Name
Ext.1 : - - - - - - - -
- - - - - - - -
VCR
Ext.2 : - - - - - - - -
DVD
Ext.3 : - - - - - - - -
Cable STB
HD STB
AV : - - - - - - - -
Sat. STB
S-video : - - - - - - - -
AV Recv.
Component : - - - - - - - -
Move Enter Return
45
ENG
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ √