Using The Data Service - Samsung HL-S5686C Owner's Instructions Manual

Using the Data Service

Application
Return
D-Net
Data Service
License
Application
Enter
Application
Return
D-Net
Data Service
License
Application
Receiving Data Service Signal
Preparing Data Service
1
Press the
Press the
ENTER button.
2
Press the
ENTER button.
√
•
•
Enter
•
3
Press the
MENU button.
or button to select "Application", then press the
or button to select "Data Service", then press the
Executable Data Applications display in the Application List program.
The DATA-SERVICE button on your remote control performs the same
function as shown above.
When the data service is set to "Off" in the Setup menu, the item cannot
be selected because it is disabled.
or button to select a Data Application to run.
English-81