Viewing An External Signal Source (Depending On The Model) - Samsung CS-21T3MA Owner's Instructions Manual

Viewing an External Signal Source
ENG
TV
Source List
Edit Name
Move Enter
TV
TV
AV1 ----
AV2 ----
S-VIDEO ----
DVD ----
Move Enter
TV
Source List
Edit Name
Move Enter
TV
AV1 : ----
AV2 : ----
S-VIDEO : ----
DVD : ----
Move Enter
TV
AV1 : ----
AV2 : ----
S-VIDEO : ----
Component : ----
Move Enter
38
All manuals and user guides at all-guides.com
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
Input
TV source (broadcast or cable)
√
√
1
2
Return
Source List
3
4
Return
Input
√
√
5
Return
6
Edit Name
√
√
√
√ 7
Return
8
Edit Name
---- √
VCR
√
9
DVD
√
Cable STB
Sat. STB
√
AV Recv.
DVD Recv.
Game 10
Camcorder
DVD Combo
Return
11
➢
(depending on the model)
Press the MENU ( ) button.
Result: The main menu is displayed.
Press the ENTER ( ) button to select Input.
Result: The options available in the Input group are
displayed.
Press the ENTER ( ) button again to select Source List.
Result: The options available in the Source List group are
displayed.
Press the ▼ or ▲ button to select signal source, then press the
ENTER ( ) button.
➢
When you connect equipment to the TV, you can choose
between the following sets of jacks : AV1, AV2, S-VIDEO or
Component on the TV's rear panel, and AV2 or S-VIDEO on
the TV's side (or front) panel.
➢
S-VIDEO and Component signal sources are depending on
the model.
Press the MENU ( ) button.
Result: The main menu is displayed.
Press the ENTER ( ) button to select Input.
Result: The options available in the Input group are
displayed.
Press the ▼ or ▲ button to select Edit Name . Press the ENTER
( ) button.
Result: The options available in the Edit Name group are
displayed.
Press the ▼ or ▲ button to select external device :
AV1 - AV2 - S-VIDEO - Component.
Press the ENTER ( ) button.
Result: The device names available are listed.
Select the name by pressing the † or ... button.
Press the ENTER ( ) button.
Set other signal sources (AV1, AV2, S-VIDEO, Component) using
the same method as listed above.
You can also set these options simply by pressing the VIDEO
( ) button. If you change the external source while
viewing, pictures might take a short period of time to be
switched.