Connect To The Computer With A Parallel Cable; Step 5 : Turn On The Printer - Samsung ML-6040 User Manual

Connect to the Computer
with a Parallel Cable
1
Make sure that both the printer and
the computer are turned off.
2
Plug the parallel printer cable into the
connector on the back of the printer.
Push the metal clips down to fit inside
the notches on the cable plug.
3
Connect the other end of the cable to
the parallel interface port on your
computer, and tighten the screws.
See your computer documentation if
you need help.
If you are using a USB interface
Go to "Using Your Printer with a USB Cable" on
page A.10.
Turn on the Printer
1
Plug the power cord into the power
receptacle on the back of the printer.
2
Plug the other end into a properly
grounded AC outlet.
3
Turn on the power.
To the parallel
port on PC
To AC outlet
S U Y P
ETTING P OUR RINTER
2.7