Step 4 : Connect To The Computer With A Parallel Cable - Samsung ML-1200 Series User Manual

Connect to the Computer with a
Parallel Cable
Note: To connect the printer to the parallel port of the computer
requires a certified parallel cable.
You will need to buy the IEEE1284 compliant cable.
1
Make sure both the printer and the computer are turned off.
2
Plug the parallel printer cable into the
connector on the back of the printer.
Push the metal clips down to fit
inside the notches on the cable plug.
3
Connect the other end of the cable to
the parallel interface port on your
computer, and tighten the screws.
See your computer documentation if
you need help.
If you are using a USB interface
Go to "Installing USB driver in Windows" on
page A.10.
2.6
S U Y P
ETTING P OUR RINTER
(ML-1210 Only)
To the parallel
port on PC