Step 4 : Connect To The Computer With A Parallel Cable; Step 5 : Turn On The Printer - Samsung ML-1440 User Manual

Connect to the Computer
with a Parallel Cable
1
Make sure that both the printer and
the computer are turned off.
2
Plug the parallel printer cable into the
connector on the back of the printer.
Push the metal clips down to fit inside
the notches on the cable plug.
3
Connect the other end of the cable to
the parallel interface port on your
computer, and tighten the screws.
See your computer documentation if
you need help.
Note: To connect the printer to the parallel port of the computer requires a certified parallel cable.
You will need to buy the IEEE1284 compliant cable.
If you are using a USB interface
Go to "Installing USB Driver" on
Note: USB cable shorter than 3m is recommended.
Turn on the Printer
1
Plug the power cord into the power
receptacle on the back of the printer.
2
Plug the other end into a properly
grounded AC outlet.
3
Turn on the power.
2.8 S U Y P
ETTING P OUR
page 2.16.
RINTER
To the parallel
port on PC
To AC outlet