Microphone - Icom IC-M412 Instruction Manual

i CHANNEL 16/CALL CHANNEL KEY [16] • [9](16)
➥ Push to select Channel 16. (p. 5)
➥ Hold down for 1 second to select Call channel. (p. 5)
• "CALL" appears when Call channel is selected.
➥ When the Call channel is selected, hold down for 3 sec-
onds to enter the Call channel programming mode. (p. 8)
➥ While holding down [CH/WX], push to enter the chan-
nel comment programming mode. (p. 8)
➥ While in the channel comment programming mode,
push to move the cursor backward. (p. 9)
➥ While holding down this key, turn ON the power to enter
the Set mode. (p. 41)
o CHANNEL/WEATHER CHANNEL KEY /DUALWATCH/
TRI-WATCH KEY [CH/WX] • [DUAL](CH/WX)
➥ Selects and toggles the regular channel and Weather
channel when pushed momentarily. (pp. 5, 6)
➥ Hold down for 1 second to start Dualwatch or Tri-watch.
(p. 12)
• Push to stop Dualwatch or Tri-watch when either is activated.
➥ While in the channel comment programming mode,
push to advance the cursor. (p. 9)
!0 DSC MENU KEY [MENU] • [MMSI](MENU) (p. 13)
➥ Push to turn the DSC menu ON or OFF.
➥ Hold down for 1 second to display the MMSI code on
the channel comment indicator. (pp. 5, 6)
PANEL DESCRIPTION
n Microphone
q
w
q PTT SWITCH [PTT]
Hold down to transmit; release to receive. (p. 7)
w CHANNEL UP/DOWN KEYS [Y]/[Z]
➥ Push to select the operating channels, Set mode set-
tings, DSC menu items, etc. (pp. 5, 6, 13, 41)
➥ During scan operation, checks TAG channels, changes
scanning direction or manually resumes the scan.
(p. 11)
e TRANSMIT POWER KEY [HI/LO]
➥ Push to select the output power high or low. (p. 7)
• Some channels are set to low power only.
➥ While holding down this key, turn ON the power to tog-
gle the Microphone Lock function ON or OFF. (p. 9)
2
2

Microphone

e
3