Parameter Data Record; Dependencies When Configuring With Gsd File - Siemens SIMATIC ET 200SP Manual

Parameter data record

A.1

Dependencies when configuring with GSD file

When configuring the module with a GSD file, remember that the settings of some
parameters are dependent on each other.
Configuring with a PROFINET GSD file
The table lists the properties and their dependencies on the measurement type and
measuring range for PROFINET.
Table A- 1 Dependencies of the measurement type / measuring range
Measure- Measuring range
ment type
Deactivated *
Voltage ±50 mV, ±80 mV,
±250 mV, ±1 V
Resistor 150 Ω, 300 Ω,
600 Ω, 3 kΩ, 6 kΩ
Resistor PTC
Thermal Pt100 climatic
resistor
Pt200
Pt500
Pt1000 climatic
Ni100
Ni120
Ni200
Ni500
Ni1000 climatic
LG-Ni 1000 climatic
52
Temperature coef- Reference junction
ficient
* *
* *
* *
* *
Pt 0.00385055 Reference channel
Pt 0.003916 of group 0, 1, 2, 3
Pt 0.003902
No reference chan-
Pt 0.00392
nel mode
Pt 0.00385
No reference chan-
nel mode
Ni 0.00618
Ni 0.00672
LG-Ni 0.005
Analog input module AI 8xRTD/TC 2-wire HF (6ES7134-6JF00-0CA1)
Temperature unit Conductor re-
sistance
* *
* *
* x
* *
Degrees Celsius x
Degrees Celsius
Degrees Fahrenheit
Degrees Celsius
Degrees Fahrenheit
Manual, 09/2018, A5E32942580-AB
A