Via5004 - Martin Audio VIA 5002 User Manual

VIA Amplifiers
VIA5004
1. Power Inlet‐ The unit should be connected to a suitable mains electricity supply using an earthed Neutrik PowerCon connection
power lead. The device has a switch mode power supply that is capable of operating with a nominal mains voltage of 100V to
230V, 50/60Hz without re‐configuration.
2. Loudspeaker Connectors‐ The amplifier Neutrik Speakon™ outputs. Connect the loudspeaker to the 1+ and 1‐ terminals. CH1
also carries the (duplicated) loudspeaker output for channel 2 on terminals 2+ and 2‐. CH3 also carries the (duplicated)
loudspeaker output for channel 4 on terminals 2+ and 2‐.
3. Analogue Audio Input Connectors‐ All audio connections are fully balanced and
wired: pin‐1 to ground (as required by the AES48 standard), pin‐2 hot & pin‐3 cold.
4. Analogue Audio Link Connectors‐ Carries a duplicate (parallel) connection from
that channel (to link to another amplifier for example).
5. Bridge switch‐ Switches the amplifier to operate in bridge mode.
VIA Amplifiers User Guide V1.0
USER GUIDE
23