VIA Amplifiers
VIA5004
1. Input Signal Indicators‐ Two indicators show "Sig", and "‐6dB" for all inputs.
The signal present Indicators operate at approximately –40 dBu.
2. Gain Control‐ Continuous adjustment from 0dB (32dB of gain) to zero (‐ )
3. Bridge Mode Indicator‐ This will illuminate when the channel pair is in Bridge
mode. The controls for the left channel of the pair will determine the settings.
See Bridge Mode
4. Clip Indicator‐ The Clip Indicators warn the user of input overload and
operate at 1dB before clip.
5. Protect indicator‐ The VIA amplifiers have sophisticated protection and
monitoring systems which keep the amplifier within its safe operating window
whenever possible. This indicator lights when the protection systems are
active in any way.
6. Power Indicator‐ The Power Switch is associated with a POWER indicator.
This red indicator is lit when power is applied, and the power switch is in the
ON position.
7. Power Switch‐ Applies mains power to the device.
VIA Amplifiers User Guide V1.0
USER GUIDE
19