Via5002 - Martin Audio VIA 5002 User Manual

VIA Amplifiers
VIA5002
1. Power Inlet‐ The unit should be connected to a suitable mains electricity supply using an earthed Neutrik PowerCon connection
power lead. The device has a switch mode power supply that is capable of operating with a nominal mains voltage of 100V to
230V, 50/60Hz without re‐configuration.
2. Loudspeaker Connectors‐ The amplifier Neutrik Speakon™ outputs. Connect the loudspeaker to the 1+ and 1‐ terminals. CH1
also carries the (duplicated) loudspeaker output for channel 2 on terminals 2+ and 2‐.
3. Analogue Audio Link Connectors‐ Carries a duplicate (parallel) connection from that channel (to link to another amplifier for
example).
4. Analogue Audio Input Connectors‐ All audio connections are fully balanced and
wired: pin‐1 to ground (as required by the AES48 standard), pin‐2 hot & pin‐3 cold.
VIA Amplifiers User Guide V1.0
USER GUIDE
22