VIA Amplifiers
Amplifier Output Connections
The VIA amplifiers are fitted with one Speakon™ connector per amplifier channel. The appropriate conductor terminations are
shown below and on the rear panel of the unit.
Additionally, channel 2 output is duplicated on the Speakon™ connector for amplifier channel 1 for Bi‐Amp wiring. Similarly, the
channel 4 output is duplicated on the Speakon™ connector for amplifier channel 3 on four channel models. This can be useful
for making a connection to two loudspeakers with one 4‐core cable (i.e. Bi‐Amp).
In addition, the channel 1 or channel 3 connector can also be used if the pair of amplifier channels is being operated in bridged
mode.
More than one speaker can be connected to each channel provided the total impedance per channel is not less than 2 ohms for
the VIA 2502 and VIA5004, or 4 ohms for the VIA5002 and VIA2004. In bridged mode for the VIA2502 and VIA5004 the minimum
total impedance should not be less than 4 ohms.
VIA Amplifiers User Guide V1.0
USER GUIDE
Amplifier output connections –channels 2 & 4
Amplifier output connections –Outputs 1 and 3
Amplifier output connections – Bridge VIA2502 and VIA5004 only
2‐
15