Samsung Color Dual Quad Network Observation System SSC21WEB User Manual page 98

SSC21WEB-3 2004.8.25
1. Connect LAN cable of Cable/ADSL modem or Direct Fixed/Static IP LAN Line to WAN port of IP Router.
2. Connect LAN ports of IP Router(1~4 or 1~8) to Ethernet port SSC21WEB to be set up and to Ethernet port of
Local PC to use during setup.
3. Connect Video cable of Camera to SSC21WEB.
4. Turn on the SSC21WEB power.
Notice
If you have a Static (Fixed) IP line or Dynamic IP line (Cable Modem or ADSL Modem) with one IP address (whether its
dynamic or fixed), but have more than one internet device to use (such as a PC and a SSC21WEB or several SSC21WEB);
you must use an IP Router (different from a simple Network Hub); you must set up the Router to work with the SSC21WEB;
and you must use a network capable PC within the local Router network to do the setup.
If you are using an existing Router which is already set up, you may not need to redo the basic setup of the Router agian, but
it is highly recommended that you at least read all the instructions below and go through the steps.Whether you are using an
existing Router or a new Router, you must go through the Port Forwarding portion of the setup.
6:48 PM Page 98
Eng-98