Samsung SSC-21WEB Installation Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security System
  5. SSC-21WEB
  6. Installation manual
Samsung SSC-21WEB Installation Manual

Samsung SSC-21WEB Installation Manual

Color quad observation system
Hide thumbs Also See for SSC-21WEB:
Table of Contents

Advertisement

Quick Links

See also: User Manual
COLOR QUAD OBSERVATION
SYSTEM
Installation Manual
SSC-21

Advertisement

Table of Contents
loading

Related Manuals for Samsung SSC-21WEB

Summary of Contents for Samsung SSC-21WEB

  • Page 1 COLOR QUAD OBSERVATION SYSTEM Installation Manual SSC-21...
  • Page 2 CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’...

  • Page 3: Important Safeguards

    Item 5. 6. Attachments : Do not use attachments not recommended by SAMSUNG as they may cause hazards. 7. Water and Moisture : Do not use this monitor near water for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool and the like.
  • Page 4 10. Power Sources : This monitor should be operated only from the type of power source indicated on the making label. If you are not sure of the type of power supply to your installation site, consult your SAMSUNG dealer or local power company.
  • Page 5 18. Replacement Parts : When replacement parts are required, be sure the service technician has used replacement parts specified by SAMSUNG or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards.
  • Page 6 FCC & ICES Information Warning This equipment has been tested and found to comply the limits for a class B digital device, pursuant to part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 7: Table Of Contents

    Contents IMPORTANT SAFEGUARDS 1. System Components and Installation 1-1. SYSTEM Components 1-2. SYSTEM CONFIGURATION 1-3. Individual Component Installation 1-4. Basic System Installation 2. Connecting Peripheral Devices 2-1. To connect a PIR Sensor 2-2. To connect a VCR 3. System Overview 4.

  • Page 8: System Components And Installation

    1. System Components and Installation 1-1. System Components MONITOR STANDARD CAMERA DOME CAMERA CAMERA CABLE CAMERA HOUSING MOUNTING BRACKET CAMERA MOUNT BRACKET ACCESSORIES ALARM CABLE INSTALLATION MANUAL POWER CORD ✳ If you have purchased only a monitor, you should directly purchase every component except accessories.

  • Page 9: System Configuration

    1-2. SYSTEM CONFIGURATION Monitor Standard Camera Dome Camera Camera Housing Mounting Bracket Camera Mount Bracket Camera Cable Installation Manual Power Cord Alarm cable ✳ If you have purchased only a monitor, you should directly purchase every component except accessories. Model Name Quantity SSC-21M SSC-21C SSC-21DC...

  • Page 10: Individual Component Installation

    1-3. Individual Component Installation 1) INSTALLING STANDARD CAMERA (SSC-21C) SSC-21C' s camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-110). • Choose an installation site that can sufficiently support the weight of the equipments to be installed.
  • Page 11 2) INSTALLING DOME CAMERA (SSC-21DC) • Remove the dome cover from the main body of the camera by turning the cover in a counter clockwise direction with one hand while holding the body with the other. • Connect the camera cable to the camera cable jack on the dome camera, then connect, and the other end of the cable to the monitor's channel input jack.
  • Page 12 • Attach the camera to the wall or ceiling using the supplied tap screws. • Adjust the video location by swiveling the camera (PCB board) up and down, and adjust the focus by turning the lens clockwise and counter clockwise. •...
  • Page 13 3) CAMERA MOUNT BRACKET(SBR-110) & STANDARD CAMERA(SSC-21C) ! Overview CAMERA MOUNT BRACKET (SBR-110) is used to attach the camera to a wall, ceiling or shelf. @ Installation Explains the installation of CAMERA MOUNT BRACKET as wall as the installation of the camera onto the CAMERA MOUNT BRACKET.
  • Page 14 • Loosen the handle by turning it in a counter clockwise direction and then adjust the camera position. Tighten the handle, turning it clockwise, and lock the camera in position. • Connect the camera cable to the camera. Handle # Specifications : Indoor Installation : Wall or Ceiling Dimensions : 52 ✕...
  • Page 15 4) MOUNTING BRACKET(SBR-120) ! Overview MOUNTING BRACKET (SBR-120) is used to install camera housing to a wall. @ Installation • Choose an installation site that can sufficiently support the weight of the equipments to be installed. • Mark the mounting holes using the house mount bracket as a template, then drill pilot holes (8 mm diameter, 45 mm depth), and then install and secure the plastic anchors.
  • Page 16 5) CAMERA HOUSING(MHG-110) ! Overview CAMERA HOUSING (MHG-110) is the equipment that protects the indoor camera from the operating environment so that the camera may perform safely. @ Installation This section explains how to install the camera within the HOUSING and how to install the CAMERA HOUSING (MHG-110) onto the MOUNTING BRACKET (SBR-120).
  • Page 17 • Loosen two screws from the CAMERA HOUSING PLATE and detach from HOUSING. • Slide the spring washer and plain washer onto the supplied screw (1/4-20UNF), then install the camera onto the camera housing plate. • Insert one end of the cable to CABLE GROUND (PG-13.5), then pull that end of the cable from the inside of HOUSING.
  • Page 18 • Connect the cable to the camera, then set up CAMERA MOUNTING PLATE and the camera in the appropriate place inside the HOUSING. • Slide the camera body into the housing body in the direction of arrow, then install the two supplied screws to the rear cap.
  • Page 19 • Use the supplied two screws and L-WRENCH to set up the CAMERA HOUSING onto WALL MOUNT BRACKET. • Use the supplied L-WRENCH to slightly loosen the hexagonal groove SCREW located at the bottom of WALL MOUNT BRACKET by turning it counter clockwise, then position the CAMERA HOUSING by tilting and swiveling, and tighten the hexagonal groove SCREW by turning it clockwise.

  • Page 20: Basic System Installation

    1-4. Basic System Installation Perform the following steps to install your system. • Take the monitor out of the packaging box. • Place the monitor where you would like to install it. Do not turn on power until installation is complete •...

  • Page 21: Connecting Peripheral Devices

    2. Connecting Peripheral Devices 2-1. To Connect a PIR Sensor Mount on the camera - An additional PIR sensor or external sensor can also be connected. - The additional PIR sensor can be connected as shown in the above graphic. - Sensor's trigger signal is NO (Normal Open).

  • Page 22: System Overview

    3. System Overview The purpose of Samsung Observation system is to provide economical yet on effective surveillance method using more than one video camera. System features are as follows: • High-quality video reproduction using Super HAD IT CCD • Real-time Quad system •...

  • Page 23: Part Names And Functions

    4. Part Names and Functions 4-1. Camera Standard Camera Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor.
  • Page 24 Fixed Dome Camera Fixed Focus Lens Fixed-focus that has a lens attached to the camera. Keep the camera free of dust or dirt. PCB Board It is an important part of the camera that carries out the main function. Handle with care. Camera Frame Frame that provides support to the camera.

  • Page 25: Monitor

    4-2. Monitor Monitor Controls - Front Panel x Monitor ON/OFF and Alarm Reset MONITOR ON/OFF In the monitor screen OFF mode, the monitor switches to the power save mode outputting only the VCR OUT signal. ✳ When an alarm occurs, while in the power save mode, Monitor screen turns on automatically.

  • Page 26: Channel Select

    z MENU Displays the SYSTEM MENU on the screen. The setup is possible in all modes, except when an alarm occurs. { LED Indicates the current status of Display Modes, both ZOOM and FREEZE. Freeze : LED flashes in red during the freeze mode. Zoom : LED flashes green in the zoom mode.

  • Page 27: Main Power

    ~ ZOOM Used to switch to the Zoom mode from Single and VCR Modes. ✳ Zoom Feature supports X2 Zoom in capability.  FREEZE Enables selection or cancellation of Freeze feature in Single Display, VCR, and Zoom Display Modes. In the Freeze mode, it is used to cancel the Freeze feature. €...
  • Page 28 Monitor Controls- Back Panel x AC IN Power input jack. y CAMERA IN A 6 Pin Modular jack used for video input and camera power input. Pin Configuration of the 6 Pin Connector is as follows. PIN NUMBER SPEC ALARM_IN VIDEO_IN AUDIO_IN 12V DC...

  • Page 29: Alarm Out

    z CAMERA OUT CAMERA OUT: This jack means a video output signal of each camera. You can use it when connecting to an external device. { VCR IN/OUT VIDEO IN : VCR video input jack. VIDEO OUT : Video recording output jack. | AUDIO IN/OUT AUDIO IN : VCR audio input jack.

  • Page 30: Setting Up The System

    5. Setting Up the System Menu Setup • Use this to set data for System operation, such as Time, Date, Alarm, etc. Whenever the MENU key is pressed, the Main Menu will be displayed (except when in the ALARM Mode). Move the cursor to the item to be set, ` L a ` M a then press the ENTER key to display the Sub Menu.
  • Page 31 3.Display Mode Setup • Use this to display date, time, and Channel Title display as well as to set the quadrant border color. • Go to "TYPE", ` L a ` M a then use the ` ˇ a ` ˆ a keys to select the display type (ALL, TITLE, DATA &...
  • Page 32 5. ALARM & BUZZER Setup • Use this to select audio output channel for alarm and video loss occurrence while in the System operation Setup and Quad modes. • Use the ` L a ` M a keys ` ˇ a ` ˆ a to set the Alarm Hold Time Setting Mode.
  • Page 33 ALARM/ZOOM/FREEZE Operation 1. ALARM Feature • When an alarm occurs, all functions of the monitor are temporarily paused and the monitor switches to the Alarm Display mode. • When an alarm trigger is received, the corresponding channel will be displayed in Single Display mode with the letter "A"...

  • Page 34: Zoom Feature

    2. ZOOM Feature • The zoom feature (X2 zoom capability) can be used while in the VCR or Single mode. • Press the ZOOM key. A Zoom Area will appear on screen. Use the ` L M ˇ ˆ akeys to move the Zoom Area to the area which you would like the monitor to zoon in on and then press the ENTER key to view X2 zoom screen.

  • Page 35: Specifications

    6.Technical Specifications SSC-21M : Monitor Specifications Model Name Broadcast System Picture Tube Horizontal Resolution Video Input/Outputs Input Signal Color subcarrier frequency sync range Range of horizontal sync frequency (HSF) Range of vertical sync frequency (VSF) High Voltage Power Consumption Convergence Power Source Operating Humidity Range Operating Temperature Range...
  • Page 36 SSC-21C : Standard Camera Model Name Broadcast System Imaging Device Effective Pixels Synchronization Resolution Signal Output S/N Ratio Minimum Object Illumination Gamma Correction I/O Connectors Lens Shutter System Audio Operating Temperature Power Source Power Consumption Dimensions Weight SSC-21C NTSC STANDARD 1/3"...
  • Page 37 SSC-21DC : Fixed Dome Camera Model Name Broadcast System Imaging Device Effective Pixels Synchronization Resolution Signal Output S/N Ratio Minimum Object Illumination Gamma Correction I/O Connectors Lens Shutter System Operating Temperature Power Source Power Consumption Dimensions Weight SSC-21DC NTSC STANDARD 1/3"...
  • Page 38 Memo...
  • Page 39 Memo...
  • Page 40 Samsung CCTV dba GV1 1621 West Crosby, Suite 104 Carrollton, TX. 75006 PHONE : 866.492.8246 Part No.: AA68 - 02504A Printed in Korea...

This manual is also suitable for:

Ssc-21

Table of Contents